Goblin RTA

Finally, I have my hands on the Goblin. 

Is the Goblin taking the vape world by storm? Is it really everything it's cracked up to be?

With ridiculous air flow, four post design, ALL STAINLESS (!!) construction AND under 40 bucks, it is a definitive force to be reckoned with. It does have a few kinks, but at the present time, I am all but sure the v1.2 has rectified most of them. Let's break it down now.

With atomizers, it goes without saying that the quality of the atomizer in question is quintessential. If the manafacturer cut corners, you're going to to run into some difficulty. Posts can spin (or, in one case with a plume veil I had, NOT EVEN DRILLED OUT), screws can strip, decks short, etc, the list goes on and on. So, in the 24.99-34.99 price point, it's a safe bet to assume costs were invariably cut somewhere.

Well, either Youde is really, really good at keeping material and overhead down, or they just know what the community wants. After the animosity surrounding the ceramic wick in the atlantis, the chrome plated brass plume veil clones, and the chrome plated brass aspire mini, Youde listened to the community. Some put too much stock in the brass/stainless war, but I certainly want stainless steel, when available, at all times. It should be the standard, at this point. Copper and brass look fine on a mod, but I do not want any particulate matter in my lungs, and I'm sure nobody else does either.

So Youde decided to construct this bad mother out of solid stainless steel. The drip tip, deck, and chimney are 100% stainless, which is both durable, and SAFE. This is the kind of quality I've come to expect from higher priced authentic devices, and to see a 29.99 down RTA constructed out of stainless steel, is, well... a steal (don't groan, I know that was awful.)

Big plus, in my book. Now, just because it is constructed out of a preferable material, does that also mean the device boasts  similarly admirable usability? Yes, in fact, it does. Everything about the device is built solid. The deck is done exceptionally well, with rigid, straight posts. The screws are a bit finicky with larger wire, but we'll touch on that later. The deck itself is machined incredibly well, with some very unique juice channels. They run all the way down the base, ensuring a perfect vacuum is achievable. The included drip tip is a no frill approach, but has a wide enough bore. The 510 pin protrudes nicely, ensuring a snug fit on most devices, and even hybrid devices. The adjustable pin is solid copper, to boost conductivity.The included pyrex is reasonably thick, and fits like a glove when the tank itself is assembled. I do, however, have a few small complaints.

For one, the deck and chimney are on the small side. This makes builds larger than 2.5mm in a diameter a struggle, and to be perfectly honest, regular builds can be tricky as well. I find the key is getting your leads clipped as short as humanely possible, so that you can ensure the coils are as close to the block as possible. If they're even a touch backed out, when the equally small chimney is screwed down, the coils will touch the wall and short. I had a bit of difficulty adjusting to this, but it is rectified rather easily - 28g wires seems to be the consensus here, as you can get more wraps and maintain a smaller coil. This is something easily overlooked once you get more comfortable acclimating to the space constraints. I can know wedge in builds will relative ease, it just required a bit of a learning curve.

The second complaint is the screw hole on the bottom. This device is fed juice by way of a fill hole, which I have never been a fan of. The provided screw locks into place with ease, but for some reason, the device does occasionally leak - something I observed over the course of a few days. It could be the viscosity of higher VG juice, but for some reason, it does have a tendency to get a bit leaky.

Suffice to say, the Goblin is constructed well. Initially, the community was a bit nit-picky about the 3ml capacity, but Youde quickly introduced a larger tank and chimney, allowing the v1.2 to hold a surprisingly large amount of juice - 5ml, to be exact. Unlike the atlantis, you do not have to buy this extension separately - both the chimney and pyrex are included, which is a nice bonus.


So...let's break down the pros and cons so far.

PROS

• Solid, full stainless steel construction
• Ridiculous airflow (3mm, dual)
• V1.2 includes an extension tube for higher capacity (5ml)
• 22mm
• Drip tip included

CONS

• Deck is on the small side
• Screws are hit or miss
• Tends to leak from the fill hole (minimally, but noticeable.)
• It can be hard to wick the device. I will share a video that was instrumental in getting this to perform to expectations, as the man explains it far better than I ever could.

So far....it's a very, very good start. The pros far outweigh the cons. Now, if you're wondering how it performs...

It's an absolute monster. 

The Goblin v1.2 is a lean, mean, asskicking RTA machine. Though the design may need refining ever so slightly, it's an absolute beast of a tank, giving the closet RDA experience, in RTA form. The dual 3mm airflow is just as big as the mephisto! It's larger than the sub tank, atlantis, lemo, billow, etc - it just puts the majority of the market to shame. With the right build, and wicking, you can get serious sub-ohm clouds, and flavor to boot.

I was, in all honesty, absolutely blown away by this device. Before I go on further, let me back peddle abit.

The Goblin has four channels, which need to be delicately taken care of, in order to ensure optimal performance. I could give you a run down, but I found a video that explains in the greatest of detail how to get this thing rocking and rolling, with absolutely NO dry hits. I struggled getting consistent hits, until I stumbled upon this. Do yourself a favor and give it a look - this man has it down to a science.





Okay...so, if you managed to sit through that incredibly long video, I applaud you, and hope you're well on your way to enjoying the device.

Once the build is perfected, their is absolutely no competition. The goblin can keep up with chain vaping, high VG juice, you name it. It seems that the science behind it is perfecting the wicking - and though it may be a continous process of frustrating trial and error, it is absolutely worth it. My experience with RTAs is minimal, but I can tell you that it gave me a far more enjoyable experience than the likes of the lemo, the billow, and the kayfun v4. It's on it's way to become an industry leader, and I see future revisions as the king of the RTA game.

Personally, I find it to be hands down, the best experience outside of an RDA. If you're looking to chase clouds and flavor, this does it all in stride. It is an absolute blessing, as I can now drive and work around the house without taking a pause to get a nice, dense, flavorful cloud.


It's a no brainer. Stop by www.mtbakervapor.com and use coupon code VAPOCALYPTIC and pick yours up today!

Sigelei 150w

Today, I'll be reviewing the Sigelei 150w box mod. This thing is an absolute monster of a device, that just so happens to be affordable - at 99.99, you'd be hard pressed finding a similarily powerful device at that price point. You can pick yours up at www.alluringvapors.com for 99.99

If you haven't caught on, the wattage/box race is on - it is almost on a weekly basis that we see a new 20w, 30w, 50w, 100w+ device hitting the market. Clearly, the community is moving quickly in this direction - we need power, we need variability, and we need it now. Capitalizing on the success of the revisioned Sigelei (the 100w+), Sigelei brings something not exactly new, but better, to the table - the Sigelei 150w box mod. Notable improvements over the 100w+ are as follows

• 150w limit
• Bottom vent is now slotted
• No waves!
• Larger button
• Fires to 0.1 ohm

Let's hit the manafacturers description

• Variable Wattage Operating Range: 10.0W – 150.0W
• Lowest Atomizer Resistance:0.1Ω
• Battery Voltage Operating Range: 6.4V – 8.4V
• Uses 2 x 18650 Batteries (Not Included)
• Size: 103mm x 23mm x 57mm
• Visual Operating System
• Low Voltage Protection
• Low Resistance Protection
• High Voltage Warning
• Short Circuit Protection
• Reverse Polarity Protection
• High Temperaturhole Warning
• Use Replaceable Battery

Sounds great, doesn't it? Let's get down to the review!

- Build Quality

The Sigelei 150w is built like a tank, and aptly so - it is only fitting that such a powerful device is durably built. To get started, the box itself features a very, very nice shape - the corners are completely rounded, and the box itself is not as large as you'd think - more or less the same size as the 100w+, it's large enough to contain the internals, but compact enough to fit comfortably in the hand. The aluminum model feels very sturdy, and the finish is a nice matte black. If you're one of those people who struggle to use phones with larger screens, you may want to try for a smaller device - however I quickly got used to it. Asthetically, I find it much more appealing than the 100w+  - it is well rounded, precisely well machined, ergonomic, all black, and ditched those damn waves.

The 510 connection is identical to the 100w+ - spring loaded. This is a god-send, and to those of you who own the 100w+, you'll be right at home. If you're coming from the original 100w device, you're in for a treat - you no longer have to fiddle with the adjustable/removable 510 pins. Some have reported that the spring wiggles, however my research shows that this relatively uncommon - the 510 in my device is sturdy and does not wiggle. The great thing in my opinion about spring loaded 510 connectors is that if you know your way around a box mod, if ever you run into positioning trouble, they're fairly easy to remove and reset. Nearly every atomizer I threw at this thing sat flush, with the exception of the Magma. The Magma is notorious for an absurdly long 510 pin, so when mounted flush, the occasional bump or removable of the atomizer can cause a fluctuation in ohms. This can be rectified by removing the atomizer, and screwing down until it is snug - over-tightening leads to the fluctuation, and will wear out your spring loaded 510.

The buttons on the device are similar to the 100w+, however they're slightly easier to press - the firing button is a bit more flush with the device, and has yet to stick, a problem I've encountered with previous models. The buttons used to ajdust the wattage are both very tactile and clicky - they definitely seem like they will hold up. To power the device on and off, you simply click the power button five times. To lock the device, hold the "+" and "-" button, and repeat to unlock. Simple and effective. I like that the buttons are so responsive, they are a slight improvement on previous models.

Internally, it is nearly identical to the 100w + - you have your dual battery sled, your ribbon, your vent holes, and your chip. The back plate is held on by four magnets, and I've got to say - they're incredibly strong. Often I wake up and in a daze accidentally install the door backwards, and this can definitely snap a magnet - fortunately so, I have yet to have this problem, which leads me to believe that they're quality magnets. The battery sled itself is held securely into the device, and the contact pins are springy, making installing and removing batteries quick, and less of a wear on the device. The solder and wiring are completely hidden by the battery sled and plastic housing, which is great - the 510 is also directly over the sled, and not the chip. This gives me a little more comfort knowing a potentially leaky atomizer won't destroy the electronics as easily as it can in other devices - though you definitely want to avoid this at any opportunity.

The chip was originally rumored to be an in-house model, but it was revealed that it is in fact the SX YiHi chip. As you may know, it is a buck down chip - Instead of boosting power, (potentially) lying and improperly regulating, the chip regulates voltage from 6.4-8.4v  to your setting - essentially, it is far more efficient than regulating voltage from 3.2 up to whatever it is set. The device runs incredibly cool, even at the lowest firing range - 0.1 ohms. I personally don't miss the days of warm, metal tubes.

The LCD screen is identical to previous models - not much to write about. You have your battery graph, your ohms, your voltage, and your wattage. Pretty simple. All in all, this is a very, very well built device, fine tuning on the improvements the 100w made, but not completely changing the game. So... how does it vape?

- Performance

The 150w is quite possibly one of the most flexible mods on the market.

Looking to jump into vaping? You the type who likes to go big or go home, purchasing higher end equipment to avoid the hassle?  It'll fire you clearomizers (with 510 threading) starting at 10w - you may want to find a suitable coil, but it's possible.

Just upgraded to one of the better clearomizers, the nautilus mini? The nautilus? It'll fire those comfortably at 12w - 18w, providing surprisingly dense, flavorful vape.

It'll fire your RDA, RBA, RTA with unbelievable flexibility . 

You want a hot vape? Build around 0.1-0.3, crank up the wattage. You want a cool, cloud chasing vape? Utilize surface area, building around 0.6-1.1 ohms, and dial down your wattage. You want to utilize battery life? Build around 0.8 - 1.3 ohms, and dial down the wattage. Want to utilize some ridiculous surface area? Build high wrap quad coils, crank up the voltage. Want cool vapor from a twisted build? Try a high surface area wrap. Let's get down to a few builds I tried...

Mutation x V2 
Dual coil, 24g, 6 wraps, 0.3 ohms at 70w - flavorful, dense, and cool. Comfortable hit 130w.

Mephisto
Dual coil, 24g twisted, 5 wraps - 0.1 ohms, at 80w it's relatively cool and cloudy, but at 150w it's very warm, very tasty, and ridiculously cloudy.

Doge RDA
Single coil, clapton 24g inner 26g outer, 6 wrap, 0.5 ohms - at 60w, this is an all day vape. Warm but not hot, unbelievable flavorful, and clouds as far as the eye can see.

With so much power, it all boils down to utilizing the potential of any particular build. At the approriate wattage, any coil can sing - you can literally get the exact vape you want, and how you want. This is my defacto all day device - it goes with me to work, when I go out, and everywhere in between. Oh, and did I mention the battery life is stupidly amazing? On two freshly charged batteries, I can get about a day and a half of use at 50 watts. Insane. Definitely something I wasn't used to. While I am speaking of batteries, I forgot to mention it is important to marry a pair of 18650s - 25a+ only, preferable new, never used. These two batteries will go with this device, and this device only, to ensure that the amperage and overall life of the battery deplete evenly. I personally purchased two Samsung 25rs, labelled them 1 and 2, and assigned #1 to the left slot, and #2 to the right. This is paramount, as I initially used two pretty old VTC4s and let me tell you, I couldn't get more than 6 hours out of the device.

VERDICT

TLDR: Buy it. Outside of an extra 50 watts, it isn't a drastic change from the 100w. The build quality is better, the shape is sleeker, and the buttons are better, but the overall design is similar. For an additional 10 dollars, you get an extra 50 watts, and an (imo) sleeker looking device. Honestly, it is one of the most affordable variable wattage box mods on the market, built to last, and backed by a six month manafacturer warranty. It is flexible, it is sleek, and it out performs nearly all of it's competition. What are you waiting for? Pop on over to www.alluringvapors.com and pick yours up today for just 99.99