Goblin RTA

Finally, I have my hands on the Goblin. 

Is the Goblin taking the vape world by storm? Is it really everything it's cracked up to be?

With ridiculous air flow, four post design, ALL STAINLESS (!!) construction AND under 40 bucks, it is a definitive force to be reckoned with. It does have a few kinks, but at the present time, I am all but sure the v1.2 has rectified most of them. Let's break it down now.

With atomizers, it goes without saying that the quality of the atomizer in question is quintessential. If the manafacturer cut corners, you're going to to run into some difficulty. Posts can spin (or, in one case with a plume veil I had, NOT EVEN DRILLED OUT), screws can strip, decks short, etc, the list goes on and on. So, in the 24.99-34.99 price point, it's a safe bet to assume costs were invariably cut somewhere.

Well, either Youde is really, really good at keeping material and overhead down, or they just know what the community wants. After the animosity surrounding the ceramic wick in the atlantis, the chrome plated brass plume veil clones, and the chrome plated brass aspire mini, Youde listened to the community. Some put too much stock in the brass/stainless war, but I certainly want stainless steel, when available, at all times. It should be the standard, at this point. Copper and brass look fine on a mod, but I do not want any particulate matter in my lungs, and I'm sure nobody else does either.

So Youde decided to construct this bad mother out of solid stainless steel. The drip tip, deck, and chimney are 100% stainless, which is both durable, and SAFE. This is the kind of quality I've come to expect from higher priced authentic devices, and to see a 29.99 down RTA constructed out of stainless steel, is, well... a steal (don't groan, I know that was awful.)

Big plus, in my book. Now, just because it is constructed out of a preferable material, does that also mean the device boasts  similarly admirable usability? Yes, in fact, it does. Everything about the device is built solid. The deck is done exceptionally well, with rigid, straight posts. The screws are a bit finicky with larger wire, but we'll touch on that later. The deck itself is machined incredibly well, with some very unique juice channels. They run all the way down the base, ensuring a perfect vacuum is achievable. The included drip tip is a no frill approach, but has a wide enough bore. The 510 pin protrudes nicely, ensuring a snug fit on most devices, and even hybrid devices. The adjustable pin is solid copper, to boost conductivity.The included pyrex is reasonably thick, and fits like a glove when the tank itself is assembled. I do, however, have a few small complaints.

For one, the deck and chimney are on the small side. This makes builds larger than 2.5mm in a diameter a struggle, and to be perfectly honest, regular builds can be tricky as well. I find the key is getting your leads clipped as short as humanely possible, so that you can ensure the coils are as close to the block as possible. If they're even a touch backed out, when the equally small chimney is screwed down, the coils will touch the wall and short. I had a bit of difficulty adjusting to this, but it is rectified rather easily - 28g wires seems to be the consensus here, as you can get more wraps and maintain a smaller coil. This is something easily overlooked once you get more comfortable acclimating to the space constraints. I can know wedge in builds will relative ease, it just required a bit of a learning curve.

The second complaint is the screw hole on the bottom. This device is fed juice by way of a fill hole, which I have never been a fan of. The provided screw locks into place with ease, but for some reason, the device does occasionally leak - something I observed over the course of a few days. It could be the viscosity of higher VG juice, but for some reason, it does have a tendency to get a bit leaky.

Suffice to say, the Goblin is constructed well. Initially, the community was a bit nit-picky about the 3ml capacity, but Youde quickly introduced a larger tank and chimney, allowing the v1.2 to hold a surprisingly large amount of juice - 5ml, to be exact. Unlike the atlantis, you do not have to buy this extension separately - both the chimney and pyrex are included, which is a nice bonus.


So...let's break down the pros and cons so far.

PROS

• Solid, full stainless steel construction
• Ridiculous airflow (3mm, dual)
• V1.2 includes an extension tube for higher capacity (5ml)
• 22mm
• Drip tip included

CONS

• Deck is on the small side
• Screws are hit or miss
• Tends to leak from the fill hole (minimally, but noticeable.)
• It can be hard to wick the device. I will share a video that was instrumental in getting this to perform to expectations, as the man explains it far better than I ever could.

So far....it's a very, very good start. The pros far outweigh the cons. Now, if you're wondering how it performs...

It's an absolute monster. 

The Goblin v1.2 is a lean, mean, asskicking RTA machine. Though the design may need refining ever so slightly, it's an absolute beast of a tank, giving the closet RDA experience, in RTA form. The dual 3mm airflow is just as big as the mephisto! It's larger than the sub tank, atlantis, lemo, billow, etc - it just puts the majority of the market to shame. With the right build, and wicking, you can get serious sub-ohm clouds, and flavor to boot.

I was, in all honesty, absolutely blown away by this device. Before I go on further, let me back peddle abit.

The Goblin has four channels, which need to be delicately taken care of, in order to ensure optimal performance. I could give you a run down, but I found a video that explains in the greatest of detail how to get this thing rocking and rolling, with absolutely NO dry hits. I struggled getting consistent hits, until I stumbled upon this. Do yourself a favor and give it a look - this man has it down to a science.





Okay...so, if you managed to sit through that incredibly long video, I applaud you, and hope you're well on your way to enjoying the device.

Once the build is perfected, their is absolutely no competition. The goblin can keep up with chain vaping, high VG juice, you name it. It seems that the science behind it is perfecting the wicking - and though it may be a continous process of frustrating trial and error, it is absolutely worth it. My experience with RTAs is minimal, but I can tell you that it gave me a far more enjoyable experience than the likes of the lemo, the billow, and the kayfun v4. It's on it's way to become an industry leader, and I see future revisions as the king of the RTA game.

Personally, I find it to be hands down, the best experience outside of an RDA. If you're looking to chase clouds and flavor, this does it all in stride. It is an absolute blessing, as I can now drive and work around the house without taking a pause to get a nice, dense, flavorful cloud.


It's a no brainer. Stop by www.mtbakervapor.com and use coupon code VAPOCALYPTIC and pick yours up today!