Hey everybody! Today, I'll be doing a review on the Vulcan RDA, thanks to MtBakerVapor. It is my first shot at an authentic RDA....does it stack up the onslaught of clones? Let's dig in and find out.
Specifications
Features:
- Single solid piece base construction
- Revolutionary "under-passing" juice well
- A truly functional bottom-base heat sink
- Innovative AFC side walls
- Double Laser-cut vent holes
- Red copper bottom contact pin/screw
- PEEK insulators
- 3-sets post screws out of the box
- Plastic casing doubles as an atty stand
- 22mm Base
Right off the bat, the specifications seem to put this bad boy into perspective - it features a solid base construction, the "under passing" juice well, heat sinks, PEEK insulators, and it all clocks in at under 60.00 - for an authentic. Now, I know that word gives some people the shivers, because lets face it, the clone market is exploding on what appears to be a daily basis now...however, if you build it, they will come, and the authentic market will not falter anytime soon!
To begin, let's break down the packaging.
Packaging/Presentation
This has to be, hands down, the greatest device packaging I've ever witnessed. While it does not come in a lavish keepsake-esque box, or bursting at the seams with confetti, it is elegant and eye catching, relishing in it's authentic goodness, yet simplistic enough to not be overbearing. The Vulcan itself comes in a large dripper sized piece of plastic, with two heat sinks - bottom and top. Everything is packaged neatly within this large heat sink container, and it comes off rather stylishly. It is nice to see this, rather than the same old box. At least it's something cool to keep around, and a nice place to store the vulcan when not in use.
Build Quality
An authentic device, in my opinion, poses a few expectations. First and foremost, I do not want "mystery metal." We see this commonly in fasttech products, and the cheaper spectrum of clone devices - brass, copper, "stainless"....etc. I am not as active in the community as I once was, but I still remember the lead/brass debacle, and as such, I absolutely refuse to vape anything constructed out of brass, plated with brass, or copper.
Thankfully, the Vulcan appears to be one solid chunk of stainless steel! The deck itself is carved out of a nice piece of stainless, and it is sleek, and sexy. It sports a three-post design, with the negative posts milled into the deck. While I am a big fan of the four-post deck, the old standard has held it's age, and remains easier as ever to build on. The posts are rigid, as are the thumb screws - though they take a bit to get used to, hex screws are
also included, and interchangeable I was a bit skeptic about the thumb screws, fearing that they wouldn't tighten down well enough - well, fear not, because these suckers screw down very tightly!
The juice well is surprisingly deep, and holds a relatively large amount of liquid - I'd put it on near magma levels, at least, considering what I use daily - the doge, mutation, stillare, and mutation...neither of which offer truly deep juice wells. It's a nice change of pace to squeeze just a bit more juice out of my RDA.
The sleeve itself is nice and thick, with the logo carved into the steel, of which the "V" is the airflow. The top cap features a heatsink, and the conical design leads to an elegant looking RDA. No drip tip is included, but it will accept your standard 510.
It has a copper pin, ensure maximum conductivity, and it has fired on every device it was thrown at, which is always a good sign. Lately I've been fighting finicky 510 pins, notably on my Herkales, so it's a nice change of pace not having to constantly adjust something.
Overall, it is a remarkably well built device. At 59.99, I'd wager it's one of the best bang for your buck authentic RDAs. You get a solidly constructed piece, with thick, sturdy posts, heat sinks, a large juice well, and a rather appealing looking device. While that's all amazing, you must be wondering...how does it vape?
Performance
To be perfectly honest, if you are looking to chase clouds, the Vulcan simply isn't built for that. The conical design, paired with the relatively restricted airflow, affords an entirely different experience. I found that building in the lower ohm range, around .2-.5, led to very warm, thick vapor. Compared to the mutation, for instance, the same build would be relatively cool, with an exponentially larger amount of vapor. This is due to the restricted airflow - which isn't inherently a bad thing. If you know what to expect from the Vulcan, you will know that it is more a flavor-chasing device. While it does have the
capability to produce a very respectable amount of vapor, you aren't going to be fogging up the room with this - though, I'm not sure why you'd try, and it would be some intensely hot vapor!
With the higher ohm builds, on a box mod, I was able to get some seriously great tasting flavor out of this device. The heat sinks really cool the vapor down, keeping it from overtaking the flavor - while some think heat and flavor go hand and hand, such is not the case when you don't have a large amount of airflow.
Overall, the Vulcan is exceptionally versatile - it can chuck out a respectable amount of vapor, but not ridiculous clouds - though theoretically you can, I wouldn't agree with you that it is a pleasurable vape - it simply gets too warm, too fast. I found the sweet spot on a mech to be about .5, dual coils. On a box, I was running it at about .8, around 50-60 watts. If you're looking for an affordable,, exceptionally well made, and versatile device, you cannot go wrong with the Vulcan RDA.
